GSF-9502 Digital Satellite Finder Meter Alignment FTA TV Signal Receiver

Description

How to use the starfinder:
1. Connect the star finder between the star receiver and the LNB on the antenna.
2. Adjust the knob on the front panel of the finder so that the pointer on the dial points to the "5" position.
3. Adjust the azimuth and elevation of the antenna. When the finder needle is deflected to the maximum angle, adjust the knob on the front panel counterclockwise to attenuate a part of the received signal, and then adjust the azimuth, elevation and LNB of the antenna. Polarization angle until the needle of the finder no longer increases.
4. Combine with the satellite receiver to judge whether the signal is the required satellite signal. If so, remove the star finder and reconnect the receiver to the LNB; if the received signal is not the required star signal, repeat the above work.