GoldMaster SR-525HD

Description

HDTV DVB-S2+T2/C receiver for TV, smartphones and PC + DVB2ip streamer + sat finder + DVB-T2 finder + s2 spectrum analyzer + remote diagnostics
RECEIVER-ANALYSER-METER-FINDER (R.A.M.F.)
- Almost professional sat finder with spectrum analyzer. Open the detailed
R
AMF options manual
(link to it below in the description), and you will see that this receiver is easier to compare with Promax than with conventional Chinese sat finders
R.A.M.F
-
All the main functions of the receiver appear when using the receiver together with an android smartphone or tablet. Namely
:
- Use without a TV. You can make all the settings, scan channels and view them on mobile android devices.
Conax Card subscription details view:
- spectrum
Panoramic mode (in reports):
Super high resolution. 4900 points
High band
detect locked hills (channels)
detect 3G/4G/LTE Noise bands (cable
bad isolation)
-
interference for bad cable quality: (under developing)
red is problem looking
for example low quality cable usage and many connections of parts used
blue after problem reason solved
at red u can see 1800 and 2100 4g interference also
12417-10600= 1817 mhz --> 4g band
12690-10600= 2090 ~2100 mhz
so. picture has 2 problems. bad cabling and 4g interference with bad cabling reason
bad cables due to lower rssi ?
yea, for some bands
its not flat as perfect case
- this special
special spectrum view mode
can detect lnb
self oscillations between multiple lnb compare
- An excellent device for DVB-T2 antenna installation. The signal shows in decibels, it is easy to see the signal margin.
- dvb-c is dvb cable support + report checker as well:
Create and share report easy
-RAMF DVB-C Report:
- Diagnostics of the state of the satellite system. There is a function to take a report and send it to the installer or operator. Detailed information about the reports is in the detailed instructions
proof of performance (export via USB)
- The receiver has an Open Web API. This means that any web programmer can modify or create their own extensions and applications.
- 3dlnb support protocol:
The most optimal connection system is that the receiver connects via LAN to an AC router (the supported protocol is at least IEEE 802.11ac), and the smartphone connects via Wi-Fi to the router at a frequency of 5.0 GHz. This will allow you to watch over Wi-Fi HD, 4:2:2 or even 4K (UHD) channels at up to 22 MBit/s. When using this connection, problems with viewing channels can only occur if the smartphone's hardware is too poor or when 4K (UHD) channels exceed the 22 MBit/s stream.
-upgrade firmware via RAMF app:
- multiple platform run/connect/manage:
run at windows as chrome extension or legacy html:
watch channels via mobile phone/tabled/ipad/computer
- self diagnostic for maintenance purpose.
Carton:
-review in different languages:
india:
https://www.youtube.com/watch?v=Jtj-LIBJ0-8
https://www.youtube.com/watch?v=G4M6iRtXOsI
Russia:
https://www.youtube.com/watch?v=qRy-NX0_Oqw
Full description in pdf download
download RAMF apk from sw/fw division
download GoldMaster SR-525HD software from download division
- download RAMF web api :
https://sky-doo.com/software/goldmaster525/api/Open_WEB_API_ver.1.17_eng.pdf
specifications:
-DVB2IP Bridge op DVB2IP Bridge options:
Open Web API...yes
Watching DVB without TV set...yes
Extension for Android Browser...yes
Application....yes
-R.A.M.F. options:
Sat Finder....yes
Spectrum....yes
DVB-T2 Finder....yes
3G/4G Finder? under development
3D R.A.M.F. LNB support....yes
Reports with signal parameters.....yes
Remote diagnostics (sending the report to the operator/installer) ....yes
Fix-it-yourself instructions....yes
-Measurements
Spectrum.....yes
RSSI.....yes
SNR.....yes
PER......yes
LM.....yes
Output voltage......yes
Signal interference.....yes
Antenna vibration.....yes
Voltage in the cable.....yes
22kHz control signal attenuate.....yes
-S.M.D.Net options:
Streaming......yes
Play content from the web link...yes
Remote control using via HDMI ...under development
One network for all devices..
under development
Playing all content in the network?.
under development
-Regular options:
MPEG-4....yes
HD....yes
HEVC......yes
UHD....Using streaming
DVB-S2X.......yes
DVB-T2/C
..........yes
CA...
...yes
Wi-Fi.......Embedded, MT7601
Lan.......yes
USB...1
RS-232....On the motherboard
HDMI......yes
AV.....Jack
s/pdif......yes
ESD protection....yes
Display.....yes
Internal IR....yes
External IR.....optional
Chipset......Montage 2230M3
*Note: in case use STB as finder, use UPS with 12v/1.5A output