Emitor Satlook Lite SWM COMPATIBLE Satellite Signal Meter - Tested ok

Description

SATLOOK LITE DVB-S SATELLITE METER BY EMITOR
The SATLOOK LITE is a Swedish made digital satellite TV signal meter. The unit is made to be one of the best and fastest tools for finding and aligning a satellite-dish towards the desired TV satellite.
Key Features:
Very handy and easy to use Satellite-TV meter
”EasyFind”- satellite identification for super fast installations
Very sensitive, easy to maximize weak and strong signals
Digital BER and S/N-ratio
Spectrum-analyzer 920-2150 MHz with zoom function
Super bright LCD display with backlight
NIT readout NIT - giving Satellite ID and TV/Radio-channel info
DiSEqC according to level 1.0, 1.1 and 1.2
LNB voltage 13/18V, 22KHz tone switch
Easy to connect with PC for upgrades
Built-in rechargeable battery
Nice & small, less then 1kg incl. battery
CE- approved
Made in Sweden
The "EasyFind" function makes this very easy as the installer can simply choose the wanted satellite from a list. In "Easyfind"mode the meter will use its full capacity to search only for unique parameters of the particular satellite. This will help the installer to make very fast and accurate installation. The "Easyfind" mode also recalls the last selection used when powered up.
The meter is intended for professional use as it presents signal levels with high accuracy and very precise information whilst being easy to operate and without a lot of unnecessary buttons and knobs. The basic functions are very easy to access and the whole process only takes minutes to learn. The meter comes with a backlit LCD screen which shows the different modes like satellite id, Digital information (like BER) and signal spectrum. The meter shows Digital information like BER (bit error rate) and S/N (signal/noise ratio).
The NIT function can identify the various TV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio-channels. Signal strength can also be presented with pitchtones from the built In loudspeaker (the higher tone, the better signal). Satlook Lite can also present the Satellite spectrum, freq: 950-2150 MHz in normal and expanded mode.
The polarisation of the LNB is switchable 13V/18V and the Hi-Lo band with 22 kHz-tone. The DiSEqC-function controls all DiSEqC-accessories (like switches, LNB´s and actuators/motors).
Power is supplied by a built-in rechargeable batteries. Even though the instrument has a lot of functions it is still very light and flexible.
Features: • Very handy and easy to use Satellite-TV meter. • ”EasyFind”- satellite identification for super fast installations. • Very sensitive, easy to maximize weak and strong signals • Digital BER and S/N-ratio • Spectrum-analyzer 920-2150 MHz with zoom function • Super bright LCD display with backlite • Readout NIT -tells Satellite ID and TV/Radio-channel info • DiSEqC according to level 1.0, 1.1 and 1.2 • LNB voltage 13/18V, 22KHz tone switch • Easy to connect with PC for upgrades. • Built in, rechargeable battery • Nice & small, less then 1kg incl. battery. • CE- approved, Made in Sweden
Technical specification:
Input frequency: 920-2150MHz
Sat-TV min level in: About 35 dBuV (noise)
Sat-TV max level in: About 100 dBuV
Input impedance: 75 Ohm, F-connector
Measuring method: EasyFind satellite-search
BER (bit error rate) S/N (signal/noise-ratio)
Spectrum analyzer
Max-level: Thermometer scale showing max
Maxhold function
BER and S/N showing max values
Pitch-tone, highest tone on loudspeaker
Satellite-identification: Yes, by reading out the NIT in the bitstream
Info about the TV and Radio channels
Satellite locks on: FEC, Symbol-rate Frecuency, 13/18v, 22kHz
Presentation: On LCD with backlight
Power out: Yes, 13-18V
22 kHz tone: Yes, on/off
DiSEqC: Yes, 1.0 and 1.1, 1.2
Upgrade software: Yes
Battery: Built in, rechargable LiP-type
Operational: About 1 hour fully charged
Weight: Less then 1kg incl.battery
Accessories: Power-supply 230V mains, 12V 1.2A Car-charger, carry strap, tough moulded rubber case